What are the network settings for a Baumer Gigabit Ethernet camera as to the NoiseImage and Baumer system requirements?

As stated in the NoiseImage system requirements, when using a Baumer Gigabit Ethernet camera, the network adapter must be able to handle 9000 bytes Jumbo Frames.

Jumbo Frames lead to a faster bulk transmission of data. When Jumbo Frames are used, the protocol overhead is minimised and fewer checksums are calculated. All devices in the network handling Baumer camera data are required to support Jumbo Frames.

Make sure to take over the current network and driver settings for increase of network performance from the Website of the camera manufacturer Baumer:

  • Jumbo Frames
  • Interrupt modulation rate and
  • Receive buffer.

https://www.baumer.com/de/en/service-support/technical-information-industrial-cameras/gige-adapter-settings/a/gigabit-ethernet-adapter-settings

The network adapter's transfer rate should be min. 1 GBit/s.

Baumer supplies a number of network adapters for their Gigabit Ethernet cameras. We strongly recommend that you use only those mentioned in this list:

https://www.baumer.com/us/en/product-overview/industrial-cameras-image-processing/accessories-image-processing/pcie-adapters/c/14190/products

Visit the website Berlin Beamforming Conference held by GFaI e. V. https://www.bebec.eu.